Hyundai Accent Manuals

Hyundai Accent: Replacement - Front Lower Arm. Repair procedures - Front Suspension System - Suspension SystemHyundai Accent: Replacement

1.
Remove the front wheel & tire.

Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

Be careful not to damage to the hub bolts when removing the front wheel & tire.
2.
Loosen the nut and remove the lower arm (A).

Tightening torque :
58.8 ~ 70.6N.m(6.0 ~ 7.2kgf.m, 43.4 ~ 52.1lb-ft)

3.
Loosen the bolts & nuts and then remove the lower arm (A) with the sub frame.

Tightening torque :
Front
98.1 ~ 117.7N.m(10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)
Rear
156.9 ~ 176.5N.m(16.0 ~ 18.0kgf.m, 115.7 ~ 130.2lb-ft)

4.
Installation is the reverse of removal.

Front Lower Arm. Repair procedures
...

Inspection
1. Check the bushing for wear and deterioration. 2. Check the lower arm for deformation. 3. Check the all bolts ...

See also:

Fender. Repair procedures
Replacement • When removing and installing the fender, an assistant is necessary. ...

If engine doesn't turn over or turns over slowly
1. If your vehicle has an automatic transaxle, be sure the shift lever is in N (Neutral) or P (Park) and the emergency brake is set. 2. Check the battery connections to be sure they are clean and t ...

Distributing the sealant
11. Immediately drive approximately 4~6miles (7~10km or, about 10min) to evenly distribute the sealant in the tire. Do not exceed a speed of 50 mph (80 km/h). If possible, do not fall below a speed ...

Hyundai Accent Manuals

© 2011-2026 Copyright www.hamanual.com