Replacement
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
|
3. |
Remove the crash pad side switch assembly (A).
|
4. |
Disconnect the rheostat connector from lower crash pad switch.
|
5. |
Remove the rheostat switch.
|
6. |
The installation is the reverse of removal.
|
Inspection
1.
Check that the light operate according to the following timing
chart.
2.
If the daytime running light is not operated well, insp ...
Heated Oxygen Sensor (HO2S). Description and Operation
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina
and is installed both upstream and downstream of the Manifold Catalytic Converter.
The sensor output voltage varies ...
Jump starting
Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm
to yourself or damage to your vehicle or battery, follow the jump starting procedures.
If in doubt, we strongly recomme ...