Hyundai Accent Manuals

Hyundai Accent: Service Standard - Specifications - General Information - Engine Control/Fuel SystemHyundai Accent: Service Standard

Item
Specification
Ignition Timing (°)
BTDC 3 ± 10
Idle Speed (rpm)
A/C OFF
Neutral, N, P-range
630 ± 100
D-range
630 ± 100
A/C ON
Neutral, N, P-range
700 ± 100
D-range
700 ± 100


Specifications
Fuel Delivery System Items Specification Fuel Tank Capacity 43 lit. (11.4 U.S.gal., 45.4 U.S.qt., 37.8 Imp.qt.) ...

Tightening Torques
Engine Control System Item kgf.m N.m lb-ft ECM installation bolt 1.0 ~ 1.2 9.8 ~ 11.8 7.2 ~ 8.7 ...

See also:

If engine doesn't turn over or turns over slowly
1. If your vehicle has an automatic transaxle, be sure the shift lever is in N (Neutral) or P (Park) and the emergency brake is set. 2. Check the battery connections to be sure they are clean and t ...

Oil Pump. Components and Components Location
Components 1. Oil pump cover 2. Oil pump housing 3. Driven gear 4. Drive gear 5. Oil seal 6. Bushing-housing 7. Reaction shaft 8. Bushing-reaction shaf ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS). Specifications
Specifications Direct control VFS[UD/B] ▷ Control type : Normal high type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.5 ~ 0.1, 7.82 ~ 1.42) ...

Hyundai Accent Manuals

© 2011-2026 Copyright www.hamanual.com