Hyundai Accent: SS-A Solenoid Valve(ON/OFF). Specifications
Hyundai Accent RB (2010-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / SS-A Solenoid Valve(ON/OFF). Specifications
Specifications
ON/OFF Solenoid Valve(SS-A, SS-B)
▷ Control type : Normal low type
|
Control pressure kpa (kgf/cm², psi) |
490.33(5.0, 71.12) |
|
Internal resistance(Ω) |
10 ~ 11 |
SS-A Solenoid Valve(ON/OFF). Description and Operation
Description
SS-A solenoid valve is attached to the valve body and is an on/off solenoid
valve that is used to change gears. SS-A Solenoid valve(ON/OFF) is installed
at valve body.
...
SS-A Solenoid Valve(ON/OFF). Schematic Diagrams
Circuit Diagram
...
See also:
Wheel. Repair procedures
Hub Nut Tightening Sequence
Tighten the hub nuts as follows.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Front Seat Belt. Repair procedures
Replacement
Front Seat Belt Replacement
•
When installing the belt, make sure not to damaged t ...
Inspection
Driver Airbag (DAB)
If any improper parts are found during the following inspection, replace
the airbag module with a new one.
...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com