Hyundai Accent: Removal
PODS-F ECU
| 1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
| 2. |
Remove the front passenger seat assembly.
(Refer to the Body group - "Seat")
|
| 3. |
Remove the seat cushion cover assembly.
(Refer to the Body group - "Seat")
|
| 4. |
Remove the seat track assembly.
(Refer to the Body group - "Seat")
|
PODS-F Mat
| 1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
| 2. |
Remove the front passenger seat assembly.
(Refer to the Body group - "Seat")
|
| 3. |
Remove the seat cushion assembly.
(Refer to the Body group - "Seat")
|
Installation
PODS-F ECU
1.
Install the PODS-F ECU equipped seat track assembly.
(Refer to the Body group - "Seat")
2.
Install the ...
See also:
Installation
1.
Install the heater & air conditioning controller.
2.
Install the audio unit.
3.
Connect the battery (-) ...
Reassembly
1.
Wrap tape around the driveshaft spline(TJ) to prevent damage to
the boots.
2.
Apply grease to the joint boot on the side of the wheel an ...
General Information
General
The supplemental restraint system (SRS) is designed to supplement the
seat belt to help reduce the risk or severity of injury to the driver and passenger
by activating and deploying ...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com