Description
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using the specified tester. If the circuit
resistance is measured with a tester, accidental airbag deployment will
result in serious personal injury.
|
Inspection
Antenna Cable
1.
Remove the antenna jack from the audio unit and antenna.
2.
Check for continuity between the center poles of antenna cable ...
SRSCM Connector terminal
Pin
Function (Connector A)
Pin
Function (Connector B)
1
Ignition
1
Seat belt pretensioner [Drive ...
Power Door Mirror Actuator. Repair
procedures
Inspection
1.
Remove the front door quadrant delta cover.
(Refer to the BD group - "Front door")
2.
Disconnect the power door ...