1. |
Disconnect the battery negative cable and wait for at least 3
minutes before beginning work.
|
2. |
Remove the roof trim.
(Refer to the Body group - "Interior")
|
3. |
Disconnect the curtain airbag harness connector.
|
4. |
After loosening the mounting bolts remove the curtain airbag.
|
License plate light bulb replacement
4 Door
1. Remove the trunk trim.
2. Remove the socket by turning it counterclockwise.
3. Remove the bulb by pulling it straight out.
4. Install a new bulb.
5. Install the socket by turning it c ...
Floor mat anchor
When using a floor mat on the front floor carpet, make sure it attaches to the
floor mat anchor(s) in your vehicle. This keeps the floor mat from sliding forward.
WARNING
The floor mat must be ...
Components and Components Location
Component Location
1. Trunk lid actuator & switch
2. Rear door switch
3. Body control module
4. Key warning switch
5. Front door switch
6. Front door loc ...