Hyundai Accent: Removal
| 1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
| 2. |
Remove the seat belt after pushing the lock pin (A).
|
| 3. |
Remove the following parts.
(Refer to the Body group - "Interior trim")
|
| 4. |
Remove the upper anchor bolt.
|
| 5. |
Disconnect the seat belt pretensioner connector (A).
|
| 6. |
Loosen the seat belt pretensioner mounting bolts (B,C) and remove
the seat belt pretensioner.
|
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes.
...
See also:
Inside rearview mirror
Adjust the rearview mirror so that the center view through the rear window is
seen. Make this adjustment before you start driving.
WARNING - Rear visibility
Do not place objects in the rear seat ...
Adjustment
1.
Install the selected cable (B) to the selected lever (A) of the
manual transaxle in engine room.
2.
Assemble the shift lever ass ...
Towing service
If emergency towing is necessary, we recommend having it done by an authorized
Hyundai dealer or a commercial tow-truck service. Proper lifting and towing procedures
are necessary to prevent dam ...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com