Hyundai Accent: Installation
| 1. |
Installation is the reverse of removal.
|
| 2. |
After installation, bleed the brake system. (Refer to Brake system
bleeding)
|
| 3. |
Check the spilled brake oil.
|
Inspection
1.
Check the brake tubes for cracks, crimps and corrosion.
2.
Check the brake hoses for cracks, damage and fluid leakage.
3 ...
Brake Pedal. Components and Components Location
Components
1. Brake pedal member assembly
2. Stop lamp switch
3. Pedal bushing
4. Return spring
5. Brake pedal
6. Brake pedal pad
...
See also:
In case of an emergency while driving
If the engine stalls at a crossroad or crossing
If the engine stalls at a crossroad or crossing, set the shift lever in the N
(Neutral) position and then push the vehicle to a safe place.
If you h ...
Use high quality ethylene glycol coolant
Your vehicle is delivered with high quality ethylene glycol coolant in the cooling
system. It is the only type of coolant that should be used because it helps prevent
corrosion in the cooling syst ...
SS-B Solenoid Valve(ON/OFF). Specifications
Specifications
ON/OFF Solenoid Valve(SS-A, SS-B)
▷ Control type : Normal low type
Control pressure kpa (kgf/cm², psi)
490.33(5.0, 71.12)
...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com