Front Brake Pads |
1. |
Remove the brake hose mounting bracket bolt (A).
|
2. |
Loosen the guide rod bolt (B) and pivot the caliper (C) up out
of the way.
|
3. |
Replace pad shim (D), pad retainers (C) and brake pads (B) in
the caliper carrier (A).
|
Interior A ( 4Door )
Front pillar trim mounting hole (Ø8.5)
Front pillar trim mounting hole (Ø8)
Cowl cross ...
Front Body A ( 4Door )
Hood hinge mounting hole (Ø10)
Fender apron upper member tooling
hole (Ø6.6)
Front shock ...
Installation
1.
Place the thermostat in the block.
Install the thermostat (B) with the jiggle valve
upward.
2.
Install the water inlet fitting ( ...