Hyundai Accent: Actual Measurement Dimensions ( 4Door )

Hyundai Accent RB (2010-2018) Service Manual / Body (Interior and Exterior) / Body Dimensions / Under Body. Body Repair / Actual Measurement Dimensions ( 4Door )


Front side member tooling hole (Ø6.6)	Side cover mounting hole (B/B’: Ø6.6/ Ø8.6)	Front sub frame mounting hole (Ø17)

Front sub frame mounting hole (Ø22)	Center floor side member tooling hole (Ø10)	Center floor side member tooling hole (Ø6)

Rear floor side member tooling hole (Ø8.8)	Rear suspension mounting hole (Ø10)	Rear suspension mounting hole (Ø10)

Rear floor side member tooling hole (Ø8)	Rear floor side member tooling hole (Ø15)

Projected Dimensions ( 4 Door )

Front side member tooling hole (Ø6.6) Side cover mounting hole (B/B’: Ø6.6/ Ø8.6) ...

Projected Dimensions ( 5 Door )

Front side member tooling hole (Ø6.6) Side cover mounting hole (Ø8.6) Front sub frame m ...

See also:

Engine compartment fuse replacement
1. Turn the ignition switch and all other switches off. 2. Remove the fuse panel cover by pressing the tab and pulling up. 3. Check the removed fuse; replace it if it is blown. To remove or insert ...

Installation
1. Installation is the reverse of removal. 2. Use a SST (09581-11000) when installing the brake caliper assembly. 3 ...

Schematic Diagrams
Schematic Diagram Connector pin number Pin No. Discription Remark 1 - 2 - ...

Hyundai Accent Manuals

© 2011-2025 Copyright www.hamanual.com