Hyundai Accent: Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications
Hyundai Accent RB (2010-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications
Specifications
Direct control VFS[T/CON]
▷ Control type : Normal low type
|
Control Pressure kpa (kgf/cm², psi) |
9.81 ~ 500.14 (0.1 ~ 5.5, 1.42 ~ 7.82) |
|
Current value(mA) |
50 ~ 850 |
|
Internal resistance(Ω) |
5.1 |
Torque Converter Control Solenoid Valve (T/CON_VFS). Description and Operation
Description
Torque converter control solenoid valve (T/CON_VFS) is attached to the
valve body. This variable force solenoid valve directly controls the hydraulic
pressure inside the torque c ...
Torque Converter Control Solenoid Valve (T/CON_VFS). Schematic Diagrams
Circuit Diagram
...
See also:
Tire rotation
To equalize tread wear, it is recommended that the tires be rotated every 7,500
miles (12,000 km) or sooner if irregular wear develops.
During rotation, check the tires for correct balance.
When r ...
Repair procedures
Adjustment
TCM Learning
When shift shock is occurred or parts related with the transaxle are replaced,
TCM learning should be performed.
In the following case, TCM learnin ...
Installation
•
Install the component with the specified
torques.
•
...
Hyundai Accent Manuals
© 2011-2025 Copyright www.hamanual.com