Hyundai Accent Manuals

Hyundai Accent: Front Bumper. Repair procedures - Bumper - Body (Interior and Exterior)Hyundai Accent: Front Bumper. Repair procedures

Hyundai Accent RB (2010-2018) Service Manual / Body (Interior and Exterior) / Bumper / Front Bumper. Repair procedures

Replacement

•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
•
Take care not bend or scratch the cover and other parts.
1.
Loosen the radiator upper cover mounting bolts and clips.
2.
Remove the mounting clips.
3.
After loosening the front bumper side’s mounting screw, then disconnect the side’s.
4.
Push the lock pin, disconnect the fog lamp connector (A).
5.
Remove the front bumper.
6.
Installation is the reverse of removal.
•
Make sure the connector is plugged in properly.
•
Replace any damaged clips.

Front Bumper. Components and Components Location
Components 1. Front bumper cover 2. Radiator grill upper cover 3. Front bumper side bracket [ LH] 4. Front bumper side bracket [RH] ...

Rear Bumper. Components and Components Location
Components [Sedan] 1. Rear bumper cover 2. Rear bumper side bracket [RH] 3. Rear bumper side bracket [LH] [5 Door] 1. ...

See also:

Installation
PODS-F ECU 1. Install the PODS-F ECU equipped seat track assembly. (Refer to the Body group - "Seat") 2. Install the ...

Variant coding
After replacing the SRSCM with a new one, must be performed the “Variant Coding” procedure. 1. On ...

Disassembly
Key lock assembly 1. Make a groove on the head of special bolts (A) by a punch. 2. Loosen the special bolt using a screw driver an ...

Hyundai Accent Manuals


© 2011-2025 Copyright www.hamanual.com