To defog inside windshield
1. Set the fan speed to the desired position.
2. Select desired temperature.
3. Select the or
position.
4. The outside (fresh) air will be selected automatically. If the
position is selected, air conditioning
will also be selected automatically.
If the air conditioning and/or outside (fresh) air position are not selected automatically, press the corresponding button manually.
To defrost outside windshield
1. Set the fan speed to the highest position.
2. Set the temperature to the extreme hot position.
3. Select the position.
4. The outside (fresh) air and air conditioning will be selected automatically.
Rail Pressure Sensor (RPS). Troubleshooting
Signal Waveform
...
Vehicle weight
This section will guide you in the proper loading of your vehicle, to keep your
loaded vehicle weight within its design rating capability. Properly loading your
vehicle will provide maximum return ...
Installation
Side Impact Sensor
•
Do not turn the ignition switch ON and do not connect
the battery c ...