Hyundai Accent: Removal
|
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Using a screwdriver or remover, remove the center fascia garnish
(A).
|
| 3. |
Disconnect 3 connectors (A) (A/C switch, Hazard switch and defroster
switch).
|
| 4. |
After loosening the mounting screws, then remove the audio assembly
(A).
|
| 5. |
Disconnect the audio connectors and cable (A).
|
InstallationChanging a tire with TPMS
If you have a flat tire, the Low Tire Pressure will come on. Have the flat tire
repaired by an authorized HYUNDAI dealer as soon as possible or replace the flat
tire with the spare tire.
CAUTION ...
Heated Oxygen Sensor (HO2S). Troubleshooting
Signal Waveform
...
Components and Components Location
Component Location
1. Instrument cluster assembly
2. Seat belt switch
3. Vehicle speed sensor
4. Engine coolant temperature sender
5. Oil pressure switch
6. Brake fl ...