Hyundai Accent: Installation

Hyundai Accent RB (2010-2018) Service Manual / Body Electrical System / Audio / Audio Unit. Repair procedures / Installation

1.	Connect the audio unit connectors and cable.

2.	Install the audio unit.

3.	Install the crash pad center fascia garnish.

4.

Check the audio system.

Make sure the audio head unit connectors are plugged in properly, and the antenna cable is connected properly.

Removal

• Take care not to scratch the center fascia panel and related parts. ...

Speakers. Repair procedures

...

See also:

Inspection
1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure resistance between ...

26 Brake Control Solenoid Valve(26/B_VFS). Specifications
Specifications Direct control VFS[26/B] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 9.81 ~ 500.14 (0.1 ~ 5.5, 1.42 ~ 7.82) ...

Adjustment
ETC module learning procedure When installing new ETC module or re-installing it, ETC module learning procedure must be performed. 1. Hold the ignition k ...

Hyundai Accent Manuals

© 2011-2026 Copyright www.hamanual.com