Hyundai Accent: Removal
| 1. |
Remove the rear roof trim.
(Refer to the Body group - Roof trim).
|
| 2. |
Disconnect the antenna cable (A).
|
| 3. |
Remove the roof antenna (A) after removing a nut.
|
Inspection
Antenna Cable
1.
Remove the antenna jack from the audio unit and antenna.
2.
Check for continuity between the center poles of antenna cable ...
Installation
1.
Install the roof antenna and connect the cable.
2.
Install the roof trim.
...
See also:
26 Brake Control Solenoid Valve(26/B_VFS). Specifications
Specifications
Direct control VFS[26/B]
▷ Control type : Normal low type
Control Pressure kpa (kgf/cm², psi)
9.81 ~ 500.14
(0.1 ~ 5.5, 1.42 ~ 7.82)
...
Replacement
Rear Door Trim Replacement
•
Take care not to scratch the door trim and other parts.
...
Installation
Side Impact Sensor
•
Do not turn the ignition switch ON and do not connect
the battery c ...
Hyundai Accent Manuals
© 2011-2025 Copyright www.hamanual.com