Hyundai Accent: Removal

Inspection

Horn Inspection Test the horn by connecting battery voltage to the 2 terminal and ground the 1 terminal. 1 : 12V Ground(-) 2 : 12V (+) ...

Installation

1. Connect the horn connector, then reassemble the horn. ...

See also:

Rear Seat. Repair procedures
Replacement Seat Assembly Replacement 1. After loosening the mounting bolt, then remove the rear seat cushion (A). Tightening torque : ...

Installation
1. Dowel pin of crankshaft should be positioned at 3° in relation to vertical center line. 2. Align the TDC marks (A) of the CVVT ...

Inspection
1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...