Inspection
1. |
Remove the front door quadrant delta cover.
(Refer to the BD group - "Front door")
|
2. |
Disconnect the power door mirror connector from the harness.
|
3. |
Apply battery voltage to each terminal as shown in the table and
verify that the mirror operates properly.
Side Repeater Lamp
Mirror Heater
|
Inspection
1.
Disconnect the ignition switch connector (B) and key switch connector
(A) from under the steering column.
2.
Check for continui ...
Hazardous driving conditions
When hazardous driving conditions are encountered such as water, snow, ice, mud,
sand, or similar hazards, follow these suggestions:
Drive cautiously and allow extra distance for braking.
Av ...
Replacement
Trunk Lid Assembly Replacement
•
When removing and installing the trunk lid, an assistant
...