Hyundai Accent: Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the driver airbag module.
(Refer to the RT group - "DAB and Clock spring")
|
| 3. |
Remove the steering wheel.
(Refer to the ST group - "Steering column & shaft")
|
| 4. |
Remove 2 screws on the steering wheel.
|
| 5. |
Remove the steering wheel cover (A) after loosening 4 screws.
|
| 6. |
Remove the hands free switch.
|
Inspection
1.
Check the hands free remote control switch for resistance between
No.4 and No.5 terminals in each switch position.
[Audio + Bluetooth Hands Free]
...
Installation
1.
Reassemble the hands free switch after connecting the connector.
2.
Reassemble the steering wheel.
3.
Reasse ...
See also:
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes.
...
Seat Belt Pretensioner (BPT). Description and Operation
Description
The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH
& RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner
seat belt hel ...
Rear Hub - Carrier. Components and
Components Location
Components
1. Rear torsion beam assembly
2. Brake assembly
3. Rear wheel hub assembly
4. Rear brake disc
5. Rear brake disc mounting screw
6. Rear wheel / T ...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com