Hyundai Accent: Installation

Hyundai Accent RB (2010-2018) Service Manual / Body Electrical System / Lighting System / Hazard Lamp Switch. Repair procedures / Installation

1.	Install the hazard lamp switch.

2.	Connect the connectors.

3.	Install the center fascia garnish.

4.	Connect the negative (-) battery terminal.

Removal

1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the center fascia garnish (A). ...

Inspection

1. Operate the switch and check for continuity between terminals. ...

See also:

SS-A Solenoid Valve(ON/OFF). Specifications
Specifications ON/OFF Solenoid Valve(SS-A, SS-B) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33(5.0, 71.12) ...

Troubleshooting
Basic Troubleshooting Basic Troubleshooting Guide Customer Problem Analysis Sheet Basic Inspection Procedure Measuring Condition of Electronic Parts' Resistance The ...

Replacement
Problems And Replacement Parts: Problem Part set GDS required? All keys have been lost Blank key (4) YES An ...

Hyundai Accent Manuals

© 2011-2025 Copyright www.hamanual.com