Disassembly of the thermostat would have an adverse
effect, causing a lowering of cooling efficiency.
|
1. |
Drain engine coolant so that its level would be under
the thermostat height.
|
2. |
Remove the radiator lower hose.
|
3. |
Remove the water inlet fitting (A) and thermostat
(B).
|
ETC (Electronic Throttle
Control) System. Specifications
Specification
[Throttle Position Sensor (TPS)]
Throttle angle(В°)
Output Voltage (V)
TPS1
TPS2
0
0.5
4.5
...
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the variable intake solenoid valve connector
...
Heating and air conditioning
1. Start the engine.
2. Set the mode to the desired position.
For improving the effectiveness of heating and cooling;
- Heating:
- Cooling:
3. Set the temperature control to the desired positio ...