Hyundai Accent: Thermostat. Repair procedures
Thermostat. Components and Components
Location
RemovalRemoval
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the variable intake solenoid valve connector
...
ECM Problem Inspection Procedure
1.
TEST ECM GROUND CIRCUIT: Measure resistance between
ECM and chassis ground using the backside of ECM harness connector as
ECM side check point. If the problem is fo ...
Inspection
Throttle Position Sensor (TPS)
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output voltage of
...