Hyundai Accent: ETC (Electronic Throttle
Control) System. Troubleshooting
Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / ETC (Electronic Throttle
Control) System. Troubleshooting
Fail-Safe Mode
|
Item |
Fail-Safe |
|
|
ETC Motor |
Throttle valve stuck at 7° |
|
|
TPS |
TPS 1 fault |
ECM looks at TPS2 |
|
TPS 2 fault |
ECM looks at TPS1 |
|
|
TPS 1,2 fault |
Throttle valve stuck at 7° |
|
|
APS |
APS 1 fault |
ECM looks at APS 2 |
|
APS 2 fault |
ECM looks at APS 1 |
|
|
APS 1,2 fault |
Engine idle state |
|
When throttle value is stuck at 7°, engine speed
is limited at below 1,500rpm and vehicle speed at maximum 40 ~ 50 km/h
(25 ~ 31 mph)
|
ETC (Electronic Throttle
Control) System. Specifications
Specification
[Throttle Position Sensor (TPS)]
Throttle angle(°)
Output Voltage (V)
TPS1
TPS2
0
0.5
4.5
...
See also:
Anchor Pretensioner (APT). Description and Operation
Description
Front anchor pretensioner operates as well as Belt Pretensioner at the
same time If it gets into its deploy condition after a collision. It is located
at near anchor on driver se ...
Description and Operation
Warning Lamp Activation
Warning Lamp Behavior after Ignition
On
As soon as the operating voltage is applied to the SRSCM ignition input,
the SRSCM activates the warning lamp fo ...
Removal
1.
Remove the rear roof trim.
(Refer to the Body group - Roof trim).
2.
Disconnect the antenna cable (A).
3 ...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com