Hyundai Accent: Intake Air Temperature
Sensor (IATS). Repair procedures
Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Intake Air Temperature
Sensor (IATS). Repair procedures
Inspection
| 1. |
Turn the ignition switch OFF.
|
| 2. |
Disconnect the IATS connector.
|
| 3. |
Measure resistance between the IATS terminals 3 and
4.
|
| 4. |
Check that the resistance is within the specification.
|
Intake Air Temperature
Sensor (IATS). Schematic Diagrams
Circuit Diagram
(M/T)
(A/T)
...
Engine Coolant Temperature
Sensor (ECTS). Description and Operation
Description
Engine Coolant Temperature Sensor (ECTS) is located in the
engine coolant passage of the cylinder head for detecting the engine coolant
temperature. The ECTS uses a thermistor th ...
See also:
Inspection
Lighting Switch Inspection
With the multifunction switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified, replace
the mu ...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and
IG ON.
...
Inspection
Driver Airbag (DAB)
If any improper parts are found during the following inspection, replace
the airbag module with a new one.
...
Hyundai Accent Manuals
- Hyundai Accent 2017-2022 Service Manual
- Hyundai Accent 2010-2025 Owners Manual
- Hyundai Accent 2010-2025 Service Manual
© 2011-2025 Copyright www.hamanual.com