Hyundai Accent: Crankshaft Position Sensor (CKPS). Description and Operation

Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine may stop because of CKPS signal missing.

This sensor is installed in ladder frame and generates alternating current by magnetic flux field which is made by the sensor and the target wheel when the engine rotates. The target wheel consists of 58 slots and 2 missing slots on 360 CA (Crank Angle).

Installation

• Install the component with the specified torques. • ...

Crankshaft Position Sensor (CKPS). Specifications

Specification Item Specification Coil Resistance (Ω) 774 ~ 946 [20°C (68°F)] ...

See also:

Removal
1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the glove box housing. ...

Special Tools
Use special tools when they are required. ...

Removable towing hook
1. Open the trunk lid/tailgate, and remove the towing hook from the tool case. 2. Remove the hole cover pressing the lower part of the cover on the bumper. 3. Install the towing hook by turning it ...