Hyundai Accent: Purge Control Solenoid Valve (PCSV). Description and Operation

Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when the ECM grounds the valve control line. When the passage is open (PCSV ON), fuel vapor stored in the canister is transferred to the intake manifold.

Replacement

The injector combustion seal should be replaced new one to prevent leakage after removing the injector. 1. Remove the combustion seal (A) with a wire cutter. ...

Purge Control Solenoid Valve (PCSV). Specifications

Specification Item Specification Coil Resistance (Ω) 22.0 ~ 26.0 [20°C(68°F)] ...

See also:

Installation
1. Install the washer reservoir. Before installing the pump motor, check the f ...

Description and Operation
Description The 6-spd automatic transaxle consists of an overdrive clutch (OD/C), a one-way clutch (OWC), a low and reverse brake (LR/B), an underdrive brake (UD/B), a 26 brake (26/B), and a ...

Interior light bulb replacement
1. Using a flat-blade screwdriver, gently pry the lens from the interior light housing. 2. Remove the bulb by pulling it straight out. WARNING Prior to working on the Interior Lights, ensure t ...