Hyundai Accent: Fuel Filter. Repair procedures
Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Fuel Delivery System / Fuel Filter. Repair procedures
Replacement
| 1. |
Remove the fuel pump (Refer to “Fuel Pump” in this
group).
|
| 2. |
Disconnect the electric pump wiring connector (A)
and the fuel sender connector (B).
|
| 3. |
Remove the head assembly (A) after releasing the
cushion fixing clip (B).
|
| 4. |
Disconnect the fuel tube quick-connectors (C).
|
| 5. |
Remove the fuel sender (A) in the direction of an
arrow.
|
| 6. |
Disconnect the fuel tube connector (A).
|
| 7. |
Remove the cut valve (A) after releasing hooks (B).
|
| 8. |
Remove the reservior-cup (B) after releasing the
fixing hooks (A).
|
| 9. |
Release the fixing hooks, and then remove the pre-filter
(A) and the fuel pressure regulator (B).
|
| 10. |
Replace new fuel filter.
1. Head Assembly
2. Electric Pump Motor
3. Fuel Filter
4. Fuel Sender
5. Fuel Pressure Regulator
6. Pre-filter
7. Reservoir cup
|
Inspection
[Fuel pump]
1.
Turn ignition switch OFF and disconnect the negative
(-)battery cable.
2.
Remove the fuel pump assembly.
...
See also:
Sunroof Switch. Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Open the sunglass case cover from the overhead console then remove
the 2 sc ...
Anchor Pretensioner (APT). Components and Components Location
Components
...
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) fro ...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com