Hyundai Accent Manuals

Hyundai Accent: Adjustment - Shift Lever. Repair procedures - Manual Transaxle Control System - Manual Transaxle System (M6CF1)Hyundai Accent: Adjustment

Hyundai Accent RB (2010-2018) Service Manual / Manual Transaxle System (M6CF1) / Manual Transaxle Control System / Shift Lever. Repair procedures / Adjustment

1.
Install the selected cable (B) to the selected lever (A) of the manual transaxle in engine room.
2.
Assemble the shift lever assembly (A) to the vehicle body.
3.
Install the following items;
(1)
Insert the selected cable (A) to the shift lever assembly pin(B).
(2)
Install the snap pin (C).
(3)
Be careful the shift lever not to move left or right side, push the lock piece (D) until sounds.
(4)
You have to push in the adjust (E).
(5)
Remove the neutral position pin (F).

Installation
1. Installation is the reverse of removal. ...

Back-up Lamp Switch. Description and Operation
Description Back up lamp switch is pushed by the reverse lug sliding when select arm, and switches the back up lamp. ...

See also:

Components(1)
[5 Door] 1. Roof trim 2. Retainer 3. Sunvisor 4. Assist handle 5. Assist handle bracket ...

Inspection
Lighting Switch Inspection With the multifunction switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the mu ...

Yaw-rate and G Sensor. Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the front seat (LH) assembly. (Refer ...

Hyundai Accent Manuals


В© 2011-2025 Copyright www.hamanual.com