Hyundai Accent: Back-up Lamp Switch. Repair procedures

Back-up Lamp Switch. Specifications

Specifications 1. Working voltage: DC 10~15V 2. Operating force: 3.0kg Max. 3. Voltage drop: - 0.4V ...

Inspection

1. Disconnect the back up lamp switch connector (A). 2. Check the continuity between no. 1 and 2 terminals of backup lamp switch. W ...

See also:

Operating door locks from inside the vehicle
With the door lock button To unlock a door, push the door lock button (1) to the “Unlock” position. The red mark (2) on the button will be visible. To lock a door, push the door lock bu ...

Components and Components Location
Component Location 1. Trunk lid actuator & switch 2. Rear door switch 3. Body control module 4. Key warning switch 5. Front door switch 6. Front door loc ...

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes. ...