Hyundai Accent: Back-up Lamp Switch. Specifications
Hyundai Accent RB (2010-2018) Service Manual / Manual Transaxle System (M6CF1) / Manual Transaxle Control System / Back-up Lamp Switch. Specifications
Specifications
| 1. |
Working voltage: DC 10~15V
|
| 2. |
Operating force: 3.0kg Max.
|
| 3. |
Voltage drop: - 0.4V
|
| 4. |
Working temperature: -30°C ~ 100°C [-30°F ~ 212°F]
|
Back-up Lamp Switch. Description and Operation
Description
Back up lamp switch is pushed by the reverse lug sliding when select arm,
and switches the back up lamp.
...
See also:
Inspection
TCM Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis
ground using the backside of TCM harness connector as TCM side ...
Installation
•
Install the component with the specified
torques.
•
...
Wheel nut tightening torque
Steel wheel & aluminum alloy wheel:
65~79 lb·ft (9~11 kg·m)
If you have a tire gauge, remove the valve cap and check the air pressure. If
the pressure is lower than recommended, drive slowly ...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com