Hyundai Accent: Transaxle Control Module (TCM). Description and Operation
Hyundai Accent RB (2010-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Transaxle Control Module (TCM). Description and Operation
Description
Transaxle Control Module (TCM) is the automatic transaxle's brain. The
module receives and processes signals from various sensors and implements a
wide range of transaxle controls to ensure optimal driving conditions for the
driver. TCM is programmed for optimal response to any on-road situation. In
the event of a transaxle failure or malfunction, TCM stores the fault information
in memory so that the technician may reference the code and quickly repair the
transaxle.
Functions
| • |
Monitors the vehicle's operating conditions to determine the optimal
gear setting.
|
| • |
Performs a gear change if the current gear setting differs from
the identified optimal gear setting.
|
| • |
Determines the need for damper clutch (D/C) activation and engages
the clutch accordingly.
|
| • |
Calculates the optimal line pressure level by constantly monitoring
the torque level and adjusts the pressure accordingly.
|
| • |
Diagnoses the automatic transaxle for faults and failures.
|
Components and Components Location
Components Location
[Vehicle Components]
1. Automatic transaxle
2. Transaxle control module (TCM)
3. Shift lever
4. (DLC)
[Transaxle Components ...
See also:
To decrease the cruising speed
Follow either of these procedures:
Push the SET- switch and hold it. Your vehicle will gradually slow down.
Release the switch at the speed you want to maintain.
Push the SET- switch and re ...
Installation
1.
Installation is the reverse of removal.
If the oil seal on the transaxle case side is damaged a ...
Inspection
1.
Check signal waveform of CKPS and CMPS using a GDS.
Specification:
Refer to “Waveform”
...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com