Hyundai Accent: Inspection

Hyundai Accent RB (2010-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Line Pressure Control Solenoid Valve. Repair procedures / Inspection

1.	Turn ignition switch OFF.

2.	Disconnect the oil temperature sensor connector.

3.	Measure resistance between sensor signal terminal and sensor ground terminal.

4.	Check that the resistance is within the specification.

Line Pressure Control Solenoid Valve. Repair procedures

...

Removal

Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the hydraul ...

See also:

Don't let your parking brake freeze
Under some conditions your parking brake can freeze in the engaged position. This is most likely to happen when there is an accumulation of snow or ice around or near the rear brakes or if the bra ...

Parking Brake Adjustment
• Re-setting of the parking brake is necessary after overhauling the caliper body, or if the ...

Roof Trim. Repair procedures
Replacement Sunvisor Replacement • When prying with a flat-tip screwdriver, wrap it with ...

Hyundai Accent Manuals

© 2011-2025 Copyright www.hamanual.com