Hyundai Accent: Wheel. Repair procedures
Hyundai Accent RB (2010-2018) Service Manual / Suspension System / Tires/Wheels / Wheel. Repair procedures
Hub Nut Tightening Sequence
Tighten the hub nuts as follows.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
|
When using an impact gun, final tightening torque should be checked
using a torque wrench.
|
Rear Wheel Alignment
When using a commercially available computerized wheel alignment
equipment to inspect the rear wheel alignment, always position ...
Tire. Repair procedures
•
Using tires and wheel other than the recommended sizes
could cause unusual handling charact ...
See also:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the injector connector.
3.
Measure resistance between the inject ...
Removal
1.
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
2.
Turn the steering wheel so that the ...
Troubleshooting
Troubleshooting
Symptom
Suspect area
Remedy
Engine misfire with abnormal internal lower engine noises.
Loose or improperly installed e ...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com