Hyundai Accent: Tire. Repair procedures

Wheel. Repair procedures

Hub Nut Tightening Sequence Tighten the hub nuts as follows. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Tire Wear

1. Measure the tread depth of the tires. Tread depth [limit] : 1.6 mm (0.063 in) 2. If the rema ...

See also:

Repair procedures
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below ...

Inspection
1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure resistance between ...

Installation
• Install the component with the specified torques. • ...