Hyundai Accent: Removal

Hyundai Accent RB (2010-2018) Service Manual / Suspension System / Tires/Wheels / Tire. Repair procedures / Removal

1.	Remove valve core and deflate the tire.

2.

Remove the side of the tire bead area from the wheel using tire changing machine .

•	The tire bead should be broken approx. 90° from the valve side of the wheel. The bead breaker should not be set too deep.

•	Avoid tire/tool contact with the valve on dismount.

•	Dismount should end near the valve.

3.	Rotate the wheel clockwise.

Tire Wear

1. Measure the tread depth of the tires. Tread depth [limit] : 1.6 mm (0.063 in) 2. If the rema ...

Installation

1. Apply tire soap or lubrication to the top and bottom tire beads. 2. To fit the bottom bead, position the valve at the 5 o’clock pos ...

See also:

Crankshaft Position Sensor (CKPS). Troubleshooting
Waveform This example shows a typical Crankshaft Position Sensor(CkPS) and Camshaft Position Sensor(CMPS) waveform at idle.The PCM controls the injection and ignition timing by using ...

Muffler. Components and Components Location
Components 1. Front muffler 2. Catalytic converter & center muffler assembly 3. Main muffler 4. Gasket 5. Hanger ...

Description
Automatic transaxle system relies on various measurement data to determine the current control status and extrapolate the necessary compensation values. These values are used to control the a ...

Hyundai Accent Manuals

© 2011-2025 Copyright www.hamanual.com