Replacement
1. |
Disconnect the battery negative cable from the battery.
|
2. |
Remove faulty part and fit bracket assembly to new part.
|
3. |
Secure new part to vehicle and fit connector.
|
4. |
Re-connect battery and turn ignition on.
|
5. |
Check that DTC flash rate matches virgin state indication.
|
Rear Seat Belt. Repair procedures
Replacement
Rear Seat Belt Replacement
[Sedan]
•
When installing the belt, make s ...
1. Crankcase emission control system
The positive crankcase ventilation system is employed to prevent air pollution
caused by blow-by gases being emitted from the crankcase. This system supplies fresh
filtered air to the crankcase th ...
Removal
1.
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
2.
Turn the steering wheel so that the ...