Description
Never attempt to measure the circuit resistance of the Seat Belt
Pretensioner (BPT) even if you are using the specified tester. If the
circuit resistance is measured with a tester, the pretensioner will
be ignited accidentally. This will result in serious personal injury.
|
Adjustment
Operate the horn, and adjust the tone to a suitable level by turning the
adjusting screw.
After adjustment, apply a small amo ...
Inspection
Remove the overhead console lamp assembly then check for continuity between
terminals. If the continuity is not as specified, replace the map lamp switch.
...
Installation
•
Install the component with the specified
torques.
•
...