1. |
After loosening the trunk lid hinge (A) mounting bolts, adjust
the trunk lid by moving it up or down, or right or left.
|
2. |
Adjust the trunk lid height by turning the trunk lid overslam
bumpers (B).
|
3. |
After loosening the trunk lid latch (C) mounting bolts, adjust
the trunk lid latch by moving it up or down, or right or left.
|
Oil Pump. Components and Components Location
Components
1. Oil pump cover
2. Oil pump housing
3. Driven gear
4. Drive gear
5. Oil seal
6. Bushing-housing
7. Reaction shaft
8. Bushing-reaction shaf ...
Inspection
Driver Airbag (DAB)
If any improper parts are found during the following inspection, replace
the airbag module with a new one.
...
Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the front door trim panel.
(Refer to the BD group - "Front door")
...