Hyundai Accent: Exterior

Actual Measurement Dimensions ( 5Door )

Front side member tooling hole (Ø6.6) Side cover mounting hole (Ø8.6) Front sub frame m ...

Fender. Repair procedures

Replacement • When removing and installing the fender, an assistant is necessary. ...

See also:

Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the hydraul ...

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable from battery and wait for at least three minutes befo ...

Reassembly
1. Wrap tape around the driveshaft spline(TJ) to prevent damage to the boots. 2. Apply grease to the joint boot on the side of the wheel an ...