Hyundai Accent: Battery. Repair procedures

Battery. Components and Components Location

Components 1. Battery insulation pad 2. Battery 3. Battery tray 4. Battery mounting bracket 5. ECM & bracket assembly ...

Removal and Installation

1. Disconnect the battery terminals (A). Disconnect the negative terminal first. Tightening torque (-) terminal : ...

See also:

Side Impact Sensor (SIS). Description and Operation
Description The Side Impact Sensor (SIS) system consists of two front SIS which are installed inside the Center Pillar (LH and RH). They are remote sensors that detect acceleration due to co ...

Inspection
TCM Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the resonator and the air intake hose (Refer ...