Hyundai Accent: Canister Close Valve (CCV). Description and Operation

Canister Close Valve (CCV) is normally open and is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere during EVAP leak detection process.

Fuel Pressure Control Valve. Repair procedures

Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve ...

Canister Close Valve (CCV). Specifications

Specification Item Specification Coil Resistance (Ω) 19.8 ~ 20.8 [20°C(68°F) ...

See also:

Warnings and indicators
All warning lights are checked by turning the ignition switch ON (do not start the engine). Any light that does not illuminate should be checked by an authorized HYUNDAI dealer. After starting th ...

Components and Components Location
Component Location 1. Audio unit 2. Tweeter speaker 3. Roof antenna (Radio) 4. Antenna cable connector 5. Front door speaker 6. Rear door speaker 7. Anten ...

Side Impact Sensor (SIS). Description and Operation
Description Side Impact Sensor (SIS) system consists of two P-SIS which are installed at each center of the front door module (LH and RH) and two SIS which are installed at each center pilla ...