Hyundai Accent: Clutch Release Cylinder. Repair procedures

Clutch Release Cylinder. Components and Components Location

Components 1. Union bolt 2. Gasket 3. Tube joint 4. Clutch tube 5. Valve plate 6. Valve spring 7. Bleeder screw 8. Release cylinder 9. Return sprin ...

Removal

1. Drain the brake fluid through the bleed plug (A). 2. Remove the clutch release cylinder assembly (C) after removing thd tube (B) ...

See also:

Relay Box (Engine Compartment). Repair procedures
Inspection Power Relay Test (Type A) - Do not use pliers. - ...

Repair procedures
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below ...

Replacement
Rear Brake Pads 1. Loosen the guide rod bolt (B) and then remove the rear caliper body (A). Tightening torque: 21.6 ~ 31 ...