Hyundai Accent: Components and Components Location
Components Location
|
1. PCV valve 2. Canister 3. Purge control solenoid valve (PCSV) 4. Fuel tank pressure sensor (FTPS) |
5. Canister close valve (CCV) 6. Fuel level sensor (FLS) 7. Fuel tank air filter 8. Catalytic converter |
|
1. PCV valve |
2. Canister |
|
|
|
|
3. Purge control solenoid valve (PCSV) |
4. Fuel tank pressure sensor (FTPS) |
|
|
|
|
5. Canister close valve (CCV) 7. Fuel tank air Filter |
6. Fuel level sensor (FLS) |
|
|
|
|
8. Catalytic converter (WCC) |
8. Catalytic converter (UCC) |
|
|
|
Schematic Diagrams
Schematic Diagram
...
See also:
Knock Sensor (KS). Description
and Operation
Description
Knocking is a phenomenon characterized by undesirable vibration
and noise and can cause engine damage. Knock Sensor (KS) is installed on the
cylinder block and senses engine knoc ...
Replacement
1.
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
2.
Turn the steering wheel so that the fro ...
Accelerator Position Sensor
(APS). Description and Operation
Description
Accelerator Position Sensor (APS) is installed on the accelerator
pedal module and detects the rotation angle of the accelerator pedal. The APS
is one of the most important senso ...
Hyundai Accent Manuals
- Hyundai Accent 2017-2022 Service Manual
- Hyundai Accent 2010-2025 Owners Manual
- Hyundai Accent 2010-2025 Service Manual
