Replacement
1. |
Remove the wiper arm cap (B) and remove the nuts, then remove
wiper arm (A).
|
2. |
Remove the washer hose (B).
|
3. |
Detach the clips, then remove the cowl top cover (A).
|
4. |
Installation is the reverse of removal.
|
Troubleshooting
Troubleshooting
Symptom
Suspect area
Engine will not start or struggle to start
Vapor hose damaged or disconnected
Engine strugg ...
Installation
1.
Installation is reverse of removal.
Filler-neck assembly
bracket installation nut :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 ...
Rail Pressure Sensor (RPS). Troubleshooting
Signal Waveform
...