Hyundai Accent Manuals

Hyundai Accent: Cylinder Block - Engine Mechanical SystemHyundai Accent: Cylinder Block

Installation
• Thoroughly clean all parts to be assembled. • ...

Cylinder Block. Components and Components Location
Components 1. Cylinder block 2. Ladder frame 3. Crankshaft 4. Crankshaft upper bearing 5. Crankshaft lower bearing 6. Thrust bearing 7. Main bearing cap ...

See also:

Removal
1. Remove the rear wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Snowy or icy conditions
To drive your vehicle in deep snow, it may be necessary to use snow tires or to install tire chains on your tires. If snow tires are needed, it is necessary to select tires equivalent in size and ...

Checking the brake/clutch fluid level
Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir cap and adding brake/clutch fl ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com