Hyundai Accent: Defogging logicTo reduce the probability of fogging up the inside of the windshield, the air
intake or air conditioning are controlled automatically according to certain conditions
such as
or
position.To cancel or return
the defogging logic, do the following.

Manual climate control system
1. Turn the ignition switch to the ON position.
2. Select the defrost button (
).
3. Press the air intake control button at least 5 times within 3 seconds.
The indicator on the air intake button blinks 3 times with 0.5 second of interval. It indicates that the defogging logic is canceled or returned to the programmed status.
If the battery has been discharged or disconnected, it resets to the defog logic status.

Automatic climate control system
1. Turn the ignition switch to the ON position.
2. Press the defrost button (
).
3. While holding the air conditioning (A/C) button pressed, press the air intake
control button (recirculated air position) at least 5 times within 3 seconds.
The A/C display blinks 3 times with 0.5 second of interval. It indicates that the defogging logic is canceled or returned to the programmed status.
If the battery has been discharged or disconnected, it resets to the defog logic status.
Automatic climate control system
Storage compartmentsLimp Home Function
1.
Limp Home By Tester
If the PCM (ECM) detects the fault of the SMARTRA or transponder,
the PCM (ECM) will allow limp home function of the immobilizer. Limp
h ...
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) fro ...
Rear Wheel Alignment
When using a commercially available computerized wheel alignment
equipment to inspect the rear wheel alignment, always position ...