Hyundai Accent: Engine And Transaxle Assembly. Repair procedures

Engine Mounting. Components and Components Location

Components 1. Transaxle mounting bracket 2. Rear roll stopper 3. Engine mounting bracket 4. Engine mounting support bracket ...

Removal

• Use fender covers to avoid damaging painted surfaces. • ...

See also:

Inspection
TCM Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side ...

Inspection
1. Disconnect the ignition switch connector (B) and key switch connector (A) from under the steering column. 2. Check for continui ...

Removal
1. Turn ignition switch OFF. 2. Pull up the lock of the HECU connector (A), and then disconnect the connector. ...