Hyundai Accent: ETC (Electronic Throttle
Control) System. Troubleshooting
Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / ETC (Electronic Throttle
Control) System. Troubleshooting
Fail-Safe Mode
|
Item |
Fail-Safe |
|
|
ETC Motor |
Throttle valve stuck at 7° |
|
|
TPS |
TPS 1 fault |
ECM looks at TPS2 |
|
TPS 2 fault |
ECM looks at TPS1 |
|
|
TPS 1,2 fault |
Throttle valve stuck at 7° |
|
|
APS |
APS 1 fault |
ECM looks at APS 2 |
|
APS 2 fault |
ECM looks at APS 1 |
|
|
APS 1,2 fault |
Engine idle state |
|
When throttle value is stuck at 7°, engine speed
is limited at below 1,500rpm and vehicle speed at maximum 40 ~ 50 km/h
(25 ~ 31 mph)
|
ETC (Electronic Throttle
Control) System. Specifications
Specification
[Throttle Position Sensor (TPS)]
Throttle angle(°)
Output Voltage (V)
TPS1
TPS2
0
0.5
4.5
...
See also:
Vehicle certification label
The vehicle certification label attached on the driver’s side center pillar contains
the vehicle identification number (VIN). ...
Replacement
Rear Brake Pads
1.
Loosen the guide rod bolt (B) and then remove the rear caliper
body (A).
Tightening torque:
21.6 ~ 31 ...
Adjustment
ETC module learning
procedure
When installing new ETC module or re-installing it, ETC module
learning procedure must be performed.
1.
Hold the ignition k ...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com