Hyundai Accent: Tail lamp warning chime
If you turn the ignition switch to the OFF position with the tail lamps ON and the driver's door in an open position, the warning chime will sound.
To stop the chime, perform one of the following:
1) Turn the ignition key to the ON position.
2) Turn the tail lamps OFF.
3) Close the driver's door.
CAUTION
To prevent the battery from being discharged, make sure to turn off the lamp before getting out of the vehicle.
Battery saver function
The purpose of this feature is to prevent the battery from being discharged.
The system automatically turns off the parking lights when the driver removes
the ignition key and opens the drive ...
Headlamp delay
If you turn the ignition switch to the ACC or OFF position with the headlights
ON, the headlights remain on for about 20 minutes. However, if the driver’s door
is opened and closed, the headligh ...
See also:
Good driving practices
Never take the vehicle out of gear and coast down a hill. This is extremely
hazardous. Always leave the vehicle in gear.
Do not "ride" the brakes. This can cause them to overheat and ...
Removal
1.
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
...
Rear Door. Components and Components
Location
Components
1. Rear door trim
2. Rear door seal
3. Rear door panel
4. Rear door delta inner cover
5. Rear door channel
6. Rear door belt inside weatherstrip
7. ...
Hyundai Accent Manuals
